Up MGB1970 » Restoration » Gearbox and Clutch » Gearbox Prev Next Slideshow

Previous image Next image Index page
Gearbox installed on engine
Left handed Mike installing speedometoer cable
Found a variety of suggestions on line trying one out
Ears to the rear and then install cross member and tilt into place and bolt
it didn't work with the OD to go with the rear hole 01
  it didn't work with the OD to go with the rear hole 02.jpg - Showing the method of using a long 12 inch extension to tighten the gearbox mount to cross member bolts. I ended up though, installing the bolts in the front hole in the cross member. Here they are shown going into the rear holes.  
Lifting the crossmember close enough to bolt
gearbox supproted and installed
Gearbox lever install 01
Gearbox lever install 02
Gearbox lever install 03

34 | Showing the method of using a long 12 inch extension to tighten the gearbox mount to cross member bolts. I ended up though, installing the bolts in the front hole in the cross member. Here they are shown going into the rear holes.
« | < | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 |
Total images: 40 | Help