Up MGB1970 » Restoration » Interior » Seats Slideshow

email Dave Braun at dave@dbraun99.com (click here)

The seats were going to be red with white piping. I've not seen it on modern seats, and eventually we rejected the idea and went with matching piping in Burgundy Leather. Also, seat heaters will be going in for those cool spring and fall mornings.

Seat supports cracked from improvised hole location
Creating rear shoulder belt anchors from inner tube
Rear shoulder belt anchor ready to install
Rear shoulder belt anchor installed
Seat rails in aluminum paint
Seats temporarily installed for first drive
LH seat before 03
LH seat before 01
LH seat before 02
LH seat before 04
LH seat before 05
Modified seat webbing 01
Modified seat webbing 02
LH Seat back not secure to bottom of back frame01
LH Seat back not secure to bottom of back frame02
LH seat back cover removal 01
LH seat back cover removal 02
LH seat back foam damage 01
LH seat back foam damage 02
LH Seat back stiffener 01
LH Seat back stiffener 02
LH Seat back stiffener 03
LH Seat back stiffener 04
LH Headrest details 01
LH Headrest details 02
LH Headrest details 03
LH Headrest details 04
LH headrest disassembly 01
LH headrest disassembly 02
LH headrest disassembly 03
LH headrest disassembly 04
LH headrest disassembly 05
LH headrest disassembly 06
LH headrest disassembly 07
LH headrest disassembly 08
LH headrest disassembly 09
LH headrest disassembly 10
LH bottom seat clips 01
LH bottom seat clips 02
LH bottom seat clips 03
LH bottom seat clips 04
LH seat bottom cover under attach 01
LH seat bottom cover under attach 02
LH Seat bottom modified webbing
LH Seat bottom webbing from top
LH Set bottom foam damage 01
LH Set bottom foam damage 02
RH seat back lower edge 01
RH seat back lower edge 02
RH seat back lower edge 03
RH seat back lower edge 04
RH seat back lower edge 05
RH seat bottom cover clips01
RH seat bottom cover clips02
RH seat bottom cover clips03
RH seat bottom cover clips04
RH headrest cover is over original vinyl
Stuffing old foams into new headrest covers 01
Stuffing old foams into new headrest covers 02
Stuffing old foams into new headrest covers 03
Removing Seat Foams 01
Removing Seat Foams 02
Removing Seat Foams 03
Cleaning off remaining foam
using a fuel hose as a new friction devise for head rest 01
using a fuel hose as a new friction devise for head rest 02
Masking tape and screws installs backboards
Contact cement to secure the new seat foams
A bit of plastic wrap to add in pulling down the covers
Checking seat  covers for excessive seam allowance
Installing the seat back covers 01
Installing the seat back covers 02
Installing the seat back covers 03
Using square foam to roll in the bottom flap 01
Using square foam to roll in the bottom flap 02
Seat back covers and heaters installed
Installing the seat bottom heaters 01
Installing the seat bottom heaters 02
Contact cement to install the seat bottom covers 01
Contact cement to install the seat bottom covers 02
Clipping the bottom covers to the bottom rails 01
Clipping the bottom covers to the bottom rails 02
Clipping the bottom covers to the bottom rails 03
Running the wires and connectors for the seat heaters 01
Running the wires and connectors for the seat heaters 02
Orange is power feed for heated seats
Running the wires and connectors for the seat heaters 03
Seat belts installed 01
Seat belts installed 02
Seat bolts and spacers installed to mark carpet
Seats installed 01
Seats installed 02

92 Images | Create web photo albums and photo books with Jalbum | Chameleon skin | Help