Up MGTD15470 » Progress and Milestones Prev Next Slideshow

Previous image Next image Index page
Head on work table
checking fit of rear seal and crank mains
timing chain installed to set valves
Wood stove stoked up for painting
first coat of paint
  mating gearbox to engine 2.JPG - Gearbox sugged up tight. The engine is in, and the gearbox is being mated. The manifold studs are in the block to guide the gearbox straight in. But I'm missing two bolts at the eight and four o'clock positions. I'll get some ordinary metric bolts to go above and put in the correct mad-metric bolts to mate with the aluminum sump material.  
after cleaning 2
carburetors assembled jets centered
fuel vent tubes routing RHS 2
Drive shaft complete
fan spacer and pulley in place 4

29 | Gearbox sugged up tight. The engine is in, and the gearbox is being mated. The manifold studs are in the block to guide the gearbox straight in. But I'm missing two bolts at the eight and four o'clock positions. I'll get some ordinary metric bolts to go above and put in the correct mad-metric bolts to mate with the aluminum sump material. Download
Total images: 96 | Help