Up Spitfire1974 » Restoration » Gearbox and Clutch » Clutch Prev Next Slideshow

Previous image Next image Index page
Clutch lever and backside of bearing
Mating bell housing with gearbox 01
Mating bell housing with gearbox 02
the roll pin in lever is loose, giving the pivot pin some help
Clutch line cleaned up and ready for installation
  Repairing the holes in the clutch push rod (1).JPG - The pushrod holes were elongated from wear. Welded up the elongated side and ground the weld down.  
Repairing the holes in the clutch push rod (2)
Repairing the holes in the clutch push rod (3)
Girling clutch cylinder repair kit
Piston seals and valves (1)
Piston seals and valves (2)

14 | The pushrod holes were elongated from wear. Welded up the elongated side and ground the weld down. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 46 | Help