Up MGTD15470 » Electrical » Lamps Prev Next Slideshow

Previous image Next image Index page
fishing headlamp harness through
fish wire wrapped around headlamp stay
fishing headlamp harness through 2
Underwing wiring for headlamp and side lamp
wiring front lamp with ground problems
  Head lamps work.jpg - The head lamps only need a few 'W' Clips and aiming. I scraped grounds at the lower front wing connections, tightened the nut and serated washer on the bucket to stay connection, and scraped grounds at the stay to wing connection. There was a lot of body filler under the wing! I used plenty of dielectric grease on all the connections.  
Side lamps installed 2
Turn signals work
Front lamp harness strapped to chassis
 
 

31 | The head lamps only need a few 'W' Clips and aiming. I scraped grounds at the lower front wing connections, tightened the nut and serated washer on the bucket to stay connection, and scraped grounds at the stay to wing connection. There was a lot of body filler under the wing! I used plenty of dielectric grease on all the connections. Download
Total images: 34 | Help