Up MGTD15470 » Engine XPAG TD2 15613 » Exhaust System Prev Next Slideshow

Previous image Next image Index page
 
down to tub and cowl 3
old exhaust cut up for disposal
first crack in hanger bracket
second crack in hanger bracket
  Bracket for exhaust on Gear box.JPG - Exhaust bracket. I fully expected these bolts to be 8x1mm since I didn't have the originals. Imagine my surprise when they were 5/16-22 BSF. I had some on hand from the original front rebound rubbers. The replacement rubbers require a spacer which require new, longer bolts. And that solved the mystery of why I had a bag of four 5/16-22 BSF bolts and nuts left over from the suspension build out!  
composite Gasket
tightening first pipe
fitting silencer checking clearance
tightening rear hanger
Fit shown forward

5 | Exhaust bracket. I fully expected these bolts to be 8x1mm since I didn't have the originals. Imagine my surprise when they were 5/16-22 BSF. I had some on hand from the original front rebound rubbers. The replacement rubbers require a spacer which require new, longer bolts. And that solved the mystery of why I had a bag of four 5/16-22 BSF bolts and nuts left over from the suspension build out! Download
Total images: 20 | Help