Up MGTD15470 » Tub and Wings » Doors Prev Next Slideshow

Previous image Next image Index page
door latch repair0005
JB welded RH door release0001
JB welded RH door release0002
JB weld beefed up door pegs
A right and left door latch
  Door check holes.jpg - The door check holes need to be drilled the size the metal will accomodate. After drilling the door is closed, and the door check is pushed straight through from inside the door into the rear hinge pillar on the tub. The larger hole in the door allows the door check body to pivot as the door is opened. It could be I took too much bend out of the door check rods when I 'straightened' them. It took several fittings to get this right.  
Enlarging Door check holes
Door check test fit
Exterior door handle installed
Bracket for door latch hardware
Test fitting door latch

87 | The door check holes need to be drilled the size the metal will accomodate. After drilling the door is closed, and the door check is pushed straight through from inside the door into the rear hinge pillar on the tub. The larger hole in the door allows the door check body to pivot as the door is opened. It could be I took too much bend out of the door check rods when I 'straightened' them. It took several fittings to get this right. Download
Total images: 102 | Help