Up MGTD15470 » Tub and Wings » Fuel Tank and Spare Tire Rack Prev Next Slideshow

 Previous image  Next image  Index page
Test fitting the fuel tank
Holes drilled for spare tire rack and fuel tank
Drawing bolts in
Temporary bolts in place
Interference between tire rack and tank
  Grinding off some rubber pad height.jpg - In order to lower the fuel tank slightly in the pads, we used a grinder with 80 grit disk to remove about an eighth inch from the pads. Rubber sprayed everywhere, but blew right off with compressed air.  
Checking for rack clearance
Tank and rack installed
license plate lamp installed
Side panels installed on Fuel tank
 

44 | In order to lower the fuel tank slightly in the pads, we used a grinder with 80 grit disk to remove about an eighth inch from the pads. Rubber sprayed everywhere, but blew right off with compressed air. Download
Total images: 48 | Help