Up MGTD15470 » Tub and Wings » Wings and Bonnet Prev Next Slideshow

Previous image Next image Index page
Nuts and washers primed at home
Front splash apron
running board welting
old welting
Piping vinyl color and panel match
  Painting piping.jpg - The vinyl is wrapped around a 5/16 OD hard plastic tubing, and then sown close to the edge with a one sided presser foot. We created four 72" x 4-1/2" strips on the bias from the material I bought and wrapped them around 24 feet of the plastic tubing. Final diameter is about 3/8". The smaller front valance piping is three feet long and wrapped around a 1/8" tube. Its final diameter is about 1/4". The strips are stapled to boards for painting with a combination of body, clear and flex agent.  
fitting LH rear wing
cuts for bolts on RH rear piping
Upholstery thread looped thorugh piping to draw it tight
left rear wing piping added
Rear wings installed

96 | The vinyl is wrapped around a 5/16 OD hard plastic tubing, and then sown close to the edge with a one sided presser foot. We created four 72" x 4-1/2" strips on the bias from the material I bought and wrapped them around 24 feet of the plastic tubing. Final diameter is about 3/8". The smaller front valance piping is three feet long and wrapped around a 1/8" tube. Its final diameter is about 1/4". The strips are stapled to boards for painting with a combination of body, clear and flex agent. Download
Total images: 118 | Help