Up MGTD15470 » Weather Equipment » Side Curtains Prev Next Slideshow

Previous image Next image Index page
Split rivet from the front
Finished rear side curtains
Using a soft cloth to protec the lexan
Slipping the carriage bolts and nuts in first 2
Slipping the carriage bolts and nuts in first
  RH mounted on car 1.jpg - Here it is evident that the top is mounted 3/4 inch high, unfortunately per the Moss instructions. For a two bow top mounted from scratch in new wood and interior panels, I suggest you use about 19.75 inches (and not 20.5) from the lowest point of the door to the horizontal top frame over the door.  
RH mounted on car 2
LH mounted on car 01
Side curtain buffer and hardware 01
Side curtain buffer holes drilled to 3 thrityseconds
Front side curtain snaps 02

52 | Here it is evident that the top is mounted 3/4 inch high, unfortunately per the Moss instructions. For a two bow top mounted from scratch in new wood and interior panels, I suggest you use about 19.75 inches (and not 20.5) from the lowest point of the door to the horizontal top frame over the door. Download
Total images: 60 | Help