MGB1970 » Restoration » Body » General Assembly

email Dave Braun at dave@dbraun99.com (click here)

I figured out that I needed to start showing pictures of things going together... so here are pictures showing general progress.

1 Evaporative canister install 01	2 Evaporative canister install 02	3 Painting battery try cover	4 Battery tray seal install with superglue 01	5 Battery tray seal install with superglue 02
6 Battery tray seal install with superglue 03	7 Battery tray cover test fit	8 Windows in car progressing	9 Refined fit of spares box around seal	10 Test fitting windshield to find extent of front seal
11 Old dash top vinyl panel	12 Pencil lines of dash top vinyl panel and front seal	13 Rough up paint with 220 grit 01	14 Rough up paint with 220 grit 02	15 Brush on contact cement 01
16 Brush on contact cement 02	17 Bursh on contact cement on new dash top vinyl note oversized	18 Masking tap to protect paint from contact cement on vinyl	19 Rolling from middle	20 lowering slight pimple with heat gun
21 Trimming new dash top vinyl panel with exacto blade	22 Front and bottom edges trimmed	23 Cutting openings in vinyl	24 Install cockpit tonneau cover stud	25 LH defroster opening
26 Excess material	27 Old and new dash top vinyl panel	28 Installing VIN plate and cutting holes for center support rod	29 Ready for Windshield 01	30 Ready for Windshield 02
31 Imporvised zinc plating basket for fasteners copper wire in bottom zinc chromate to finish	32 Wing splash panels installed 01	33 Wing splash panels installed 02	34 Wing splash panels installed 03

34 Images | Create web photo albums and photo books with Jalbum | Chameleon skin | Help