Up MGB1970 » Restoration » Body » Paint Slideshow

email Dave Braun at dave@dbraun99.com (click here)

Paint is so integral after fixing everything else that it deserved its own chapter. After all almost all the steps are uniform, and shouldn't be repeated ad nausium in the separate chapters of the Body section.

Ready for high build primer
Appkying DBS3055 Acrylic Urethane Surfacer
Applying DPS3055 02
Applying DPS3055 03
Applying DPS3055 04
Applying DPS3055 05
High build primer completed ready for block sanding 01
High build primer completed ready for block sanding 02
High build primer completed ready for block sanding 03
High build primer completed ready for block sanding 04
High build primer completed ready for block sanding 05
Block Sanding the high build primer 01
Block Sanding the high build primer 02
Block Sanding the high build primer 03
Final Minor fill prior to pimer sealer
Fill on door prior to sealer
Passivating the rust and metal 01
Passivating the rust and metal 02
Car ready for Primer Surfacer
DPS3055 Primer Surfacer prep 01
Engine bay taped up and ready for DPS3055
DPS3055 Primer Surfacer prep 02
DPS3055 Primer Surfacer prep 03
Primer Surfacer in the engine bay 01
Primer Surfacer in the engine bay 02
Primer Surfacer on rear dieck 2
Rolled back into the shop 01
A visiter shows up but he didn't need any paint
Hand block sanding the primer surfacer with 400 wet grit 01
Hand block sanding the primer surfacer with 400 wet grit 02
Hand block sanding the primer surfacer with 400 wet grit 03
Hand block sanding the engine bay
Spotted another defect 01
Spotted another defect 02
Shooting Primer Sealer 01
Shooting Primer Sealer 03
Shooting Primer Sealer 04
Bonnet and doors shot with primer sealer
Shot with Primer Sealer DPS3025
After the application of primer sealer
Back taping for blending Concept with Deltron 01
Back taping for blending Concept with Deltron 02
Back taping for blending Concept with Deltron 03
Masking paper along taped edge
Ready for single stage Concept on sills 01
Ready for single stage Concept on sills 02
Concept in Engine Bay 02
Concept in Engine Bay 01
Concept on door edges01
Concept on door edges02
Concept on inside of bonnet
Concept on rear shelf
After backtaping for blending on Door Sills 01
After backtaping for blending on Door Sills 02
All hard to work areas have single stage Concept
Door in place
door in place from inside 01
Door in place from inside 02
Dusting on a light coat of body color 01
Dusting on a light coat of body color 02
Dusting on a light coat of body color 03
Dusting on body color in first pass on bonnet
Adding more body color  01
Adding more body color  02
Adding more body color  03
Boot lid in body color
First and second coats of clear 01
First and second coats of clear 02
First and second coats of clear 03
First and second coats of clear 04
First and second coats of clear 05
Reflow the body color too many bugs outside
Mysterious wrinkles 01
Mysterious wrinkles 02
Sanding and repriming to remove wrinkles
Touch up Base and new clear coat without bugs
Masking removed 01
Masking removed 02
Razoring out runs
Went through clear sanding the clear with 600, 1000, 1200, 1500 paper recleared this spot
Clear sanded, Trizec 3000 is next
Bonnet clear sanded, then trizec 3000, rubbing compound, swirl remover
Sanding out minor defect while buffing 02
Using small buffing pad on the rubbing compound 02
Larger buffing wheel on the swirl remover 02
Diane inspecting
The trunk is really just sitting there
Transporting Maggie home after paint 02
Home in the garage Note the paint is chameleon like in picking up surrounding color 01
Hand touch of valance fasteners
Insufficient clear and color on leading edge of bonnet
Prepping for touchups
Clear on leading edge of bonnet
Filler cracked at weld using stranded material to repair
Smoothing repair area
Color touch up on door
Clear on door a bit light. Reclear

97 Images | Create web photo albums and photo books with Jalbum | Chameleon skin | Help