Up MGTD15470 » Weather Equipment » Hood Installation Prev Next Slideshow

Previous image Next image Index page
Painting hood bows 2
Bending top bow wood
Rear top rails in place
Rear top rails overlap 03
Rear top rails overlap 01
  Tub masked and sanding overlaps 01.jpg - I screwd the rear top rail in place and left the clamps. I masked off the tub so if I missed a bit I would take off masking tap instead of clear coat. I used a 100 grit sanding disc. I'm about half way through on the left side in this shot.  
Tub masked and sanding overlaps 02
Fitted top rails
Polyurethan top rails
twenty and a half inch stick
Hood sticks holes located and drilled

11 | I screwd the rear top rail in place and left the clamps. I masked off the tub so if I missed a bit I would take off masking tap instead of clear coat. I used a 100 grit sanding disc. I'm about half way through on the left side in this shot. Download
Total images: 40 | Help