Up MGB1970 » Restoration » Electrical » Wiring Prev Next Slideshow

Previous image Next image Index page
Over use of flash to pass switch overheated blue wires close to switch 01
Removing burned ignition wire from harness
Wrapping harness with new tape non sticky
Clamp locations
large bulkhead grommet location
  Emergency flasher can and clamp.jpg - Not the emergency flasher can, but the Key in the Ignition warning buzzer  
Ran out of blue tape but progress is good
Repaired and wrapped rire harness 01
Repaired and wrapped rire harness 03
Repaired and wrapped rire harness 04
Threading harness through bulkhead 01

29 | Not the emergency flasher can, but the Key in the Ignition warning buzzer
« | < | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | 35 | 36 | 37 | 38 | 39 | 40 | > | »
Total images: 63 | Help