Up MGTD15470 » Engine XPAG TD2 15613 » Building XPAG TD2 15613 Prev Next Slideshow

Previous image Next image Index page
 
 
 
 
Coefficient expansion iron
  engine block being bored .060 over.JPG - Boring the block out 0.060. This brings the bore to 2.6781 wihch will raise the compression ratio to 7.54:1. Also, 0.018 had to be taken from the top of the block. I'll compensate for that when I refigure the CR depending on how thick the head ends up.  
cross hatch pattern in cylinder
valve seat cutting tools
TS Balance 2
TS crank balance screen
TS drilling balance crank 2

2 | Boring the block out 0.060. This brings the bore to 2.6781 wihch will raise the compression ratio to 7.54:1. Also, 0.018 had to be taken from the top of the block. I'll compensate for that when I refigure the CR depending on how thick the head ends up. Download
Total images: 28 | Help