Up MGTD15470 » On Going Maintenance » LED Tail Lights Prev Next Slideshow

Previous image Next image Index page
Negative Ground LED rear light
Connector side of light assembly for a negative ground set note the black wire
Complete kit for positive ground note the yellow wire for ground
Taillight with bulb fitted
An original socket uses push spring terminals and bare wires to make connections
  Removing soldered large bullet from ground.jpg - I had previously tinned all the wires, and soldered on the bullet connector. I unsoldered the connector and then snipped the soldered wires a bit shorter for the terminal block provided with the lights.  
Large bullet from ground
Removing original socket
Oringal socket removed
Stainless steel hardware including spacers to fit LED assy
LED assy fitted to baseplate

6 | I had previously tinned all the wires, and soldered on the bullet connector. I unsoldered the connector and then snipped the soldered wires a bit shorter for the terminal block provided with the lights. Download
Total images: 22 | Help