Up MGTD15470 » Tub and Wings » Doors Prev Next Slideshow

Previous image Next image Index page
Relieving wood at top door hinge
Removing excess metal
Using a clamp to square up the metal to the hinge relief
Back for more door work
After test fitting restoring flange
  Bending back the flange.jpg - Showing the extent the flange was peeled back. We used a dremel to shave the wood down. It wasn't enough, and we made plans to open up the bottom edge of the door opening.  
RH door not flush at bottom hinges 01
RH door not flush at bottom hinges 02
RH door aligned at bottom edge 2
Moved to Speidels
New gap at rear of door

66 | Showing the extent the flange was peeled back. We used a dremel to shave the wood down. It wasn't enough, and we made plans to open up the bottom edge of the door opening. Download
Total images: 102 | Help