Up MGTD15470 » Tub and Wings » Doors Prev Next Slideshow

Previous image Next image Index page
Back for more door work
After test fitting restoring flange
Bending back the flange
RH door not flush at bottom hinges 01
RH door not flush at bottom hinges 02
  RH door aligned at bottom edge 2.jpg - The lower hinge has been moved in about 3/16 of an inch, pulling the lower door edge in more flush with the tub. I filled the holes with dowels and marine epoxy and redrilled in small increments. The peeling paint at the top of the door edge is from poor bonding with the aged primer, and the paint being applied too thickly.  
Moved to Speidels
New gap at rear of door
New gap at top of door
Reworked hinge stiffener bracker
Drilling out LH lower hinge

69 | The lower hinge has been moved in about 3/16 of an inch, pulling the lower door edge in more flush with the tub. I filled the holes with dowels and marine epoxy and redrilled in small increments. The peeling paint at the top of the door edge is from poor bonding with the aged primer, and the paint being applied too thickly. Download
Total images: 102 | Help