Up MGTD15470 » Tub and Wings » Wings and Bonnet Prev Next Slideshow

Previous image Next image Index page
Stand for painting the rear wing
Revised stand for painting the rear wing
Inspecting rear wing
Masked wing without bottom clear
Masking removed from running boards
  Gently prebend the strips.jpg - Gently pre-bend the long running board strips to conform to the running board. You can do it with thumb and finger pressure. Here the top long strip is straight, and the bottom long strip has been bent. They are leaning on the short rubber strips.  
center punch and drill the middle holes
Strips ready for rubber 01
Both running boards with strips installed
bonnet latches
Bonnet stripped

41 | Gently pre-bend the long running board strips to conform to the running board. You can do it with thumb and finger pressure. Here the top long strip is straight, and the bottom long strip has been bent. They are leaning on the short rubber strips. Download
Total images: 118 | Help