Up MGTD15470 » Tub and Wings » Wings and Bonnet Prev Next Slideshow

Previous image Next image Index page
Revised stand for painting the rear wing
Inspecting rear wing
Masked wing without bottom clear
Masking removed from running boards
Gently prebend the strips
  center punch and drill the middle holes.jpg - Secure the ends of the metal strips with the provided screws and center punch the holes for the remaining screws. The provided holes in the strips are countersunk to allow the miniature carriage bolts in the kit to pull in and lock on the sharp edges.  
Strips ready for rubber 01
Both running boards with strips installed
bonnet latches
Bonnet stripped
Bonnet LHcleared next polish

42 | Secure the ends of the metal strips with the provided screws and center punch the holes for the remaining screws. The provided holes in the strips are countersunk to allow the miniature carriage bolts in the kit to pull in and lock on the sharp edges. Download
Total images: 118 | Help