Up MGTD15470 » Instruments & Fascia Panel » Fascia and Panel restoration. Prev Next Slideshow

Previous image Next image Index page
Glove box ball catch
brackets on either side of glove box
Proper location for tach cable bracket
Odometer adjustment relief is short
Relief for the odometer knob
  Mirror in place and trim for glove box.jpg - I wanted to test fit the fascia with the piping, and asked Laura to come out and check my progress. She pointed out that there was a larger gap in the middle, and I realized that the dash mirror has to be installed to pull the cowl into position. Notice also the trim needed on the glove box cutout. I'll use the dremel on it.  
Test fitting panel with clamps
Straightening speedometer cured relief problem
Test fitting fascia with piping
Working out location of Turn Signal SW
Installing dash piping

65 | I wanted to test fit the fascia with the piping, and asked Laura to come out and check my progress. She pointed out that there was a larger gap in the middle, and I realized that the dash mirror has to be installed to pull the cowl into position. Notice also the trim needed on the glove box cutout. I'll use the dremel on it. Download
Total images: 80 | Help