MGTD15470 » Instruments & Fascia Panel » Fascia and Panel restoration.

email Dave Braun at dave@dbraun99.com (click here)

The original panel was red, to match the interior. When the black interior went in, the panel was changed to black. Now, it will be green, and the wiring replaced.

1 Instrument panel rear 6	2 Instrument panel out	3 glove box and welting	4 Fascia before tear down 2	5 facsia prior to tear down 1
6 Tach and speedo from behind	7 Instrument panel from behind	8 glove box door from behind	9 glove box door mount	10 instrument panel hole
11 carriage style fastners for instrument panel	12 Horn and dipswitch disassembled 2	13 Horn face before	14 horn pinch terminal	15 horn shoe polish
16 resister socket installation ignition and fuel	17 ammeter installation	18 glove box door hinges	19 Fascia panel holes and vinyl	20 glove box opening trim
21 glove box door dovetail joint	22 glove box door socket hole	23 glove box door vinyl	24 glove box door vinyl front	25 fascia panel before vinyl removal 2
26 fascia panel bagged parts	27 tracing of fascia for kevin 1	28 tracing for kevin tach and speedo	29 tracing for kevin glove box	30 fascia painted
31 cutting out pieces of vinyl	32 experimenting with 3M general adhesive and clamps	33 finished door except it is too big	34 glued on vinyl on fascia	35 ready to dart insturment openings
36 staples on fascia	37 trimmed out fascia panel parts	38 masked instrument panel chrome edge and sandblasted	39 blasted and masked for painting	40 painted and clear coat
41 instrument panel ready to install	42 repaint instrument panel with moss color	43 wearing in stiff tach reduction box	44 removed end of tach cable housing	45 label on spare speedo cable housing
46 end of spare speedo cable housing	47 spreading swaged end of speedo cable housing	48 brazed on end of tach cable housing	49 tach cable installed	50 checking fit of instrument panel
51 painting carriage bolt heads	52 fascia panel nearly complete	53 wiring instrument panel and dash	54 gauge lighting	55 choke crescent from kevin gunther
56 choke crescent creating0001	57 choke crescent creating0002	58 Original style ignition and headlamp switch	59 Origninal switch broken tab	60 Glove box ball catch
61 brackets on either side of glove box	62 Proper location for tach cable bracket	63 Odometer adjustment relief is short	64 Relief for the odometer knob	65 Mirror in place and trim for glove box
66 Test fitting panel with clamps	67 Straightening speedometer cured relief problem	68 Test fitting fascia with piping	69 Working out location of Turn Signal SW	70 Installing dash piping
71 Adding shim to bring panel out	72 Removing excess material at glove box	73 Tinning new starter cable	74 Getting ready to wire in instrument panel	75 Glove box installed
76 How deeply the sub fascia is fitting	77 Seven shim washers	78 Position of dash after shimming the sub dash 2	79 Position of fascia after shimming the sub dash	80 Fascia installed

80 Images | Create web photo albums with Jalbum | Chameleon skin | Help