Up MGTD15470 » Electrical » Electrical Restoration Prev Next Slideshow

Previous image Next image Index page
Starter swtich installed on firewall
Testing the relay box with the alternating flasher
NAPA EL-13 flasher solved problem
EL-13 Flasher close-up
Testing relay with front and rear bulbs
  Drilled holes in back of tool box and preped the ground.jpg - The mounting location of the turn signal relay is on the back side of the tool box. I drilled the holes and prepared the ground.  
Rekay box mounted and TS harness wired
Turn Signal relay box wired
Working smaller grommet on right hand loom
Easing firewall grommet down the wire branches
Working regulator wires through grommet

40 | The mounting location of the turn signal relay is on the back side of the tool box. I drilled the holes and prepared the ground. Download
Total images: 67 | Help