Up MGTD15470 » Electrical » Electrical Restoration Prev Next Slideshow

Previous image Next image Index page
turn signal buzzer polarity reversed
three eighths terminal for generator
Ignition coil installed on firewall
Regulator and fuse block installed on firewall
Starter swtich installed on firewall
  Testing the relay box with the alternating flasher.jpg - It would be silly to go through the effort of installing the turn signal relay box if it needed adjusting. I considered building a bread board to test it, but decided to use the actual harness. The relay is fine, but the flasher relay is the alternating type. The metal can on the right is the flasher. Since the flasher is always powered, the buzzer was on all the time except when flashing!  
NAPA EL-13 flasher solved problem
EL-13 Flasher close-up
Testing relay with front and rear bulbs
Drilled holes in back of tool box and preped the ground
Rekay box mounted and TS harness wired

36 | It would be silly to go through the effort of installing the turn signal relay box if it needed adjusting. I considered building a bread board to test it, but decided to use the actual harness. The relay is fine, but the flasher relay is the alternating type. The metal can on the right is the flasher. Since the flasher is always powered, the buzzer was on all the time except when flashing! Download
Total images: 67 | Help