Up MGTD15470 » Electrical » Electrical Restoration Prev Next Slideshow

Previous image Next image Index page
Final position of grommet will be closer to the last branch
Sending forward portion of loom through firewall
Forward loom coiled to keep clean
Working large branch and regulator wires through hole
Finally all the wires through
  Initial wire up of regulator horn and fuses.jpg - Preliminary wiring of the regulator and the fuse bracket, just before I wired the horns. I passed the brown wires and the white wires under the fuse holder. I had pre-tinned all the wires in the length provided by the vendor, but I figured I would be customizing the lengths and the re-tinning once I looked at what I had.  
Regulator and fuse block tidied up
Right hand side of firewall needs the ground attached
Bagged harnesses
Firewall wired except for grounds
Ground and loom hold down clamp installed

52 | Preliminary wiring of the regulator and the fuse bracket, just before I wired the horns. I passed the brown wires and the white wires under the fuse holder. I had pre-tinned all the wires in the length provided by the vendor, but I figured I would be customizing the lengths and the re-tinning once I looked at what I had. Download
Total images: 67 | Help