Up MGTD15470 » Electrical » Electrical Restoration Prev Next Slideshow

Previous image Next image Index page
Working regulator wires through grommet
Last branch to pass through the grommet
Final position of grommet will be closer to the last branch
Sending forward portion of loom through firewall
Forward loom coiled to keep clean
  Working large branch and regulator wires through hole.jpg - Still getting the wires through. It is a slow process. There is room, but you have to work with the wires and how they exit the loom, keeping them as close to the loom and their positions as possible. I did catch one of the main power wires on the edge of the hole, and put a bit of heat shrink tubing on it to further protect it.  
Finally all the wires through
Initial wire up of regulator horn and fuses
Regulator and fuse block tidied up
Right hand side of firewall needs the ground attached
Bagged harnesses

50 | Still getting the wires through. It is a slow process. There is room, but you have to work with the wires and how they exit the loom, keeping them as close to the loom and their positions as possible. I did catch one of the main power wires on the edge of the hole, and put a bit of heat shrink tubing on it to further protect it. Download
Total images: 67 | Help