Up Spitfire1974 » Restoration » Gearbox and Clutch » Clutch Prev Next Slideshow

Previous image Next image Index page
Cleaning off gasket from Gearbox
Driving out clutch pivot pin
Clutch lever and backside of bearing
Mating bell housing with gearbox 01
Mating bell housing with gearbox 02
  the roll pin in lever is loose, giving the pivot pin some help.jpg - The lower bolt needs a copper washer to seal in the gearbox fluid. I annealed this one so that it will make a good seal.  
Clutch line cleaned up and ready for installation
Repairing the holes in the clutch push rod (1)
Repairing the holes in the clutch push rod (2)
Repairing the holes in the clutch push rod (3)
Girling clutch cylinder repair kit

12 | The lower bolt needs a copper washer to seal in the gearbox fluid. I annealed this one so that it will make a good seal. Download
Image | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | > | »
Total images: 46 | Help