Up MGTD15470 » Engine XPAG TD2 15613 » Building XPAG TD2 15613 Prev Next Slideshow

Previous image Next image Index page
Weighing pistons and rods
Torquing gudgeon pinch bolts
removing front camshaft bearing from rear
checking fit of rear seal and crank mains
Installing main bearing studs with eccentric driver
  bottom rings in still need upper rings.JPG - Bottom rings installed. The pistons have been pushed up from the bottom, because the big ends of the rods are too big to fit through the cylinder bores. We will push them through, install the rings, and push them back down and torque the big end nuts.  
Installing rings
Next is the head
rocking head in place
crowned and polished tappets
Pushrods and rockers in place

19 | Bottom rings installed. The pistons have been pushed up from the bottom, because the big ends of the rods are too big to fit through the cylinder bores. We will push them through, install the rings, and push them back down and torque the big end nuts. Download
Total images: 28 | Help